Start Free Trial

Manufacturing Health & Safety Level 3 training

Five microlessons for manufacturing supervisors on the supervisor's role, planning and managing risk, leading safety culture, incidents and investigations, and monitoring performance, with situational tests and a certificate of completion.

Start free trial
G24.6Capterra4.7
Health & Safety in Manufacturing Level 3 (UK) course preview
5Short, TikTok-style microlessonsIn the browser or the iOS and Android apps

Compliance teams that chose 5Mins

Read their stories
Collingwood nsave ICAB Delamode LOQBOX Kennedys GSK Student Cribs Millennium Hotels Paris Baguette
  • 2Assessments
  • 5Microlessons
  • IncludedCertificate of completion
About this course

What the Manufacturing Health & Safety Level 3 course covers

This course prepares manufacturing supervisors to lead health and safety in five microlessons. It covers the supervisor's duties and safety-first decisions under production pressure, leading risk assessments and safe systems of work, briefings, toolbox talks and coaching, managing incidents, investigations and corrective actions, and using inspections and simple indicators to drive continuous improvement.

Learning outcomes

What your people will be able to do

  • Put safety first when production pressure and staff safety pull in different directions
  • Lead risk assessments and put suitable controls in place for workplace hazards
  • Plan and run toolbox talks, briefings, coaching and safety communications
  • Investigate incidents, find the root factors and track corrective actions to completion
  • Carry out regular workplace inspections and use indicators to drive continuous improvement
  • Make sure operators and contractors follow permits, procedures and handovers
Course contents

5 microlessons

Each microlesson is a short, TikTok-style video lesson, with knowledge checks along the way.

1The Supervisor's Health & Safety Role
2Planning and Managing Risk
3Leading Safety Culture and Communication
4Incidents, Investigations and Corrective Actions
5Monitoring Performance and Continuous Improvement

  1. The Supervisor's Health & Safety Role: Supervisors' health and safety duties and safety-first decisions under production pressure.
  2. Planning and Managing Risk: Leading risk assessments and turning controls into safe systems of work.
  3. Leading Safety Culture and Communication: Visible leadership, safety briefings, toolbox talks and coaching.
  4. Incidents, Investigations and Corrective Actions: Handling incidents, investigating root factors and following up corrective actions.
  5. Monitoring Performance and Continuous Improvement: Inspections, key indicators and continuous improvement.
A 5Mins certificate of completion for Health & Safety in Manufacturing Level 3 (UK), lying on a desk next to a laptop
Certificate

A certificate for every learner who completes it

Learners finish every microlesson and complete the assessments. 5Mins then issues a certificate of completion for Health & Safety in Manufacturing Level 3 (UK).

  • Certificates and e-signatures stored against each learner
  • Audit-ready records, ready whenever an auditor asks
  • Completion shows on the Compliance Dashboard in real time
Audience and regulation

Who it's for and the law it covers

Who it's for

  • Production and shift supervisors
  • Team leaders and line managers in manufacturing
  • Supervisors who coordinate contractors and shift handovers
  • Newly promoted supervisors

Laws covered

  • Health and Safety at Work etc. Act 1974. The general duties employers and employees have for health and safety at work.
  • Management of Health and Safety at Work Regulations 1999. Employers must assess risks, plan and control preventive measures and monitor and review them.
  • Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 (RIDDOR). Employers must report certain serious workplace injuries, occupational diseases and dangerous occurrences to the enforcing authority.
How it runs in 5Mins

Assign it once, then let 5Mins do the chasing

Every course in the 5Mins library runs on the same zero-admin engine.

  • EnrollAuto-enroll

    Enroll people automatically from your HR system, with 100+ HRIS platforms supported.

  • RemindReminders

    Nudges by email, Slack, Microsoft Teams and push until the course is done.

  • RepeatRecurrence

    Set the course to repeat, for example every 12 months, and 5Mins re-enrolls people for you.

  • CertifyCertificates

    Certificates and e-signatures are issued and stored for every completion.

  • ProveAudit-ready records

    See who is complete, at risk or overdue on the Compliance Dashboard, and prove it any time.

Customer stories

Compliance teams that swapped chasing for results

Compliance, HR and L&D leaders on what changed when they moved their training to 5Mins. Pick a team to see what changed.

ComplianceCompliance Training Insurance, 205 colleagues 100%

compliance completion and pass rate since go-live

  • ~1 day saved on each compliance course (HR estimate)
  • Automated reminders and reporting

Since go-live, our compliance completion and pass rates are 100%, and it's the quickest we've ever got there. Automated reminders and reporting save us about a day per course.

Laura ChappellLaura ChappellHR Director, Collingwood
Read the Collingwood story
ComplianceCompliance Training Insurance and emergency accommodation 87%

less session time, from 2.5-3 hour sessions to modules of 25 minutes at most

  • 12 monthly sessions a year, up from 3-4
  • 95% content creation time saved

Our compliance sessions used to be two and a half to three hours in a room, and we could fit in three or four a year. Now we cover one topic a month, and I can see exactly what people are retaining.

Lucy WybornLucy WybornDirector of Learning and Development, ICAB
Read the ICAB story
ComplianceCompliance Training Legal services 80%

completion on mandatory training, up from 20%

  • Mobile microlessons finished between calls
  • Manager view of each team's progress

We were sitting at 20% completion on our mandatory training. We're now at 80%. People finish short lessons between calls, on mobile, and managers can see where their teams are, so chasing completion is no longer a one-person job.

Jamie WaltonJamie WaltonGroup Learning and Development Officer, Winn Solicitors
See more customer stories
ComplianceCompliance Training Fintech and digital banking On demand

training log showing who did what, when, and the pass rate

  • Any device phone or laptop, at their own pace
  • Rolling refreshers through the year

When I engage with the FCA, I can show that every team has had training tailored to their role, that it's up to date, and that it runs throughout the year, with a full log of who's done what.

Abdul GofurAbdul GofurHead of Compliance & Anti-Financial Crime, nsave
Read the nsave story
★ Free sample lesson

See 5Mins in action with a free sample lesson

Interested in Manufacturing Health & Safety Level 3 training? Request a free sample lesson, book a short demo with our team, and we'll share your sample lessons after the call.

  • Real microlessons from our library
  • A short demo with our team
  • No card needed

Get a free sample lesson

Use your work email so we can arrange your demo.

We'll use your details to arrange your demo and contact you about 5Mins. See our privacy policy.

Free course catalogues

Take the catalogues with you

Free PDF catalogues to share with your compliance lead, your managers or your board.

Health and Safety Compliance Catalogue cover
Health & safety

Health and Safety Compliance Catalogue

Keep your workplace safe with training on risk assessment, manual handling, fire safety, first aid and workplace hazards.

UK Compliance Catalogue cover
UK compliance

UK Compliance Catalogue

Built for UK organizations, covering GDPR, RIDDOR, Martyn's Law, employment law and the regulations your team needs day to day.

Global Compliance Catalogue cover
Compliance

Global Compliance Catalogue

Stay compliant across every market you operate in, with regulatory training covering GDPR, data protection, workplace safety and more.

Browse all course catalogues

Your questions answered

Questions about Manufacturing Health & Safety Level 3 training

How long is the Manufacturing Health & Safety Level 3 course?

It's made up of 5 microlessons, each under 5 minutes. Learners can finish it in one sitting or spread it over a few days, and 5Mins sends reminders until it is done.

Is there a certificate?

Yes. Learners get a certificate of completion once they finish every microlesson and complete the situational tests. The record is stored in 5Mins for audits.

Which level is right for my team?

Level 1 is for new and less experienced workers. Level 2 is for experienced operators who assess and escalate risks, and Level 3 is for supervisors who lead health and safety.

Does the course cover reporting serious incidents?

Yes. The fourth microlesson covers incident reporting and when serious injuries and dangerous occurrences must be escalated, which in the UK includes reporting under RIDDOR.

How often should supervisors take health and safety training?

Train supervisors when they step into the role and refresh it regularly. In 5Mins you can set the course to repeat, for example every 12 months.

Can I try the course first?

Yes. Request a free sample lesson and book a short demo with our team. After your demo, we'll share sample lessons with you so you can see the format for yourself.

Keep exploring

Related courses

Health, Safety & Environment

Health & Safety in Manufacturing Level 2 (UK)

5 microlessons View course
Health, Safety & Environment

Health & Safety in Manufacturing Level 1 (UK)

5 microlessons View course
Health, Safety & Environment

Health & Safety Level 3 (UK)

9 microlessons View course
Health, Safety & Environment

Risk Assessment (UK)

6 microlessons View course
Health, Safety & Environment

Accident Reporting (UK)

5 microlessons View course
Health, Safety & Environment

Health & Safety Level 2 (UK)

7 microlessons View course
All compliance micro coursesBrowse the course collection
Explore 5Mins

More free resources from 5Mins

Course collection5,000+ ready-made micro courses.Explore Course cataloguesFree PDFs to share with your team.Explore Customer success storiesFilms and case studies by industry.Explore WebinarsHR Declassified, AI Declassified and Inside 5Mins.Explore Templates and guidesSkills matrix templates and how-to guides.Explore BlogGuides on compliance, AI and leadership.Explore
Get started

Give your people compliance training they'll actually enjoy

Assign Manufacturing Health & Safety Level 3 and 5,000+ other micro courses in minutes, or turn your own policies into microlessons with AI Studio.

Start free trial